Apex Pro OBDII Interface Module

$124.00

Pairs with the APEX App and APEX Pro unit hardware 

Can be used without APEX Pro unit hardware

Limited quantities available

The APEX Pro OBDII Interface integrates with the APEX iOS app seamlessly via Bluetooth to enhance the logging capabilities of your APEX Pro Hardware. Using both the APEX Pro unit and OBDII Interface allows you to get real-time feedback, dynamic data AND engine data!

Description

The OBDII interface pairs with the APEX App and APEX Pro unit hardware 

Can be used without APEX Pro unit hardware

Limited quantities available

The APEX Pro OBDII Interface integrates with the APEX iOS app seamlessly via Bluetooth to enhance the logging capabilities of your APEX Pro Hardware. Using both the APEX Pro unit and OBDII Interface allows you to get real-time feedback, dynamic data AND engine data!

No updates or changes are required to the APEX Pro unit to run alongside the OBDII Interface. OBDII can also be used with the app only (no APEX Pro unit connection) for monitoring engine data, displaying engine data, clearing OBDII trouble codes, and diagnosing trouble codes!

The OBDII Module can be used without the APEX Pro hardware. To do this, tap your User Profile and toggle on “Enable phone GPS logging”.

  • View Live OBDII Data by tapping “OBDII Dashboard” on the home screen of the app
  • Log OBDII data: Throttle position, RPM, MAP Pressure, and Coolant Temperature
  • Diagnose OBDII trouble codes and reset CEL’s
  • 0-60 Timer to show your friends! Record time, distance, and RPM
  • Compatible with all OBDII compliant vehicles (1996 and newer)
  • Data rates and data transmitted varies per vehicle. Generally, the older the vehicle is the slower data transfer will be, and the less information will be available.

Instructions:

1. Locate the OBDII port. This is different for every vehicle. The OBDII port is usually under the driver-side dashboard. Research the location for your vehicle!
2. Plug in the APEX Pro OBDII. Align socket and press firmly. A red light indicates the OBDII Interface is plugged in and powered on.
3. Start your engine.
4. Make sure you phone’s Bluetooth is turned on.
5. Open the APEX app, select ‘OBDII Dash’, tap your device, and then open the dashboard.
6. When your OBDII module is connected to the app, data will be logged in the background during your session, and a green light on the OBDII Interface will blink.
7. OBDII data is viewable on the OBDII dashboard.
8. At the bottom of the OBDII dashboard page, you can tap the CEL icon to see if you have any Trouble codes or select 0-60 Timer to test your shifting and acceleration performance.

More Info:

The OBDII Module can be used without the APEX Pro hardware. To do this, tap your User Profile and toggle on “Enable phone GPS logging”.

This will use the phone’s GPS to log speed and generate lap times. Note that the 1HZ GPS in your iOS phone is not as powerful or accurate as the unit in the APEX Pro module. Lap Times and speed data accuracy may vary.

Gauges on the dashboard can be rearranged – Tap and hold the gauge to move it on the Dashboard!

The Dashboard can be displayed in landscape view as well as portrait view! The top two gauges shown in the portrait orientation will appear on the landscape view.

%d bloggers like this: